Many people use a rotary cutter (often referred to by the copyrighted name “Bush Hog”) to cut grass and weeds, but, in too many cases, the implement is not correctly adjusted. This can cause premature wear, poor quality of cut, and an excessive power requirement.

Mid-mount mowers for lawn, garden, and compact tractors typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Finish (or grooming) mowers typically have (two or) three blades and are designed for quality mowing of turfgrass. They are not designed to cut tall, weedy grass. They have multiple gage wheels and rollers that allow a relatively low cutting height with minimal scalping.

Although most people opt for small engine-driven generators, there are some real advantages to a generator that connects to a tractor power-take-off (PTO).

A common problem with hydraulic cylinders is rust and pitting of the cylinder rods. If equipment that incorporates hydraulic cylinders is stored outside with the cylinder rods extended, the rods are exposed to weathering. Eventually, the rods will begin to show specks of rust that develop into pits. Once rusting and pitting occur, the rod will destroy the cylinder seal the next time it is activated.

When performing such light-duty operations as mowing grass or making hay, it is sometimes possible to reduce fuel consumption by shifting to a higher gear and reducing engine rpm.

Farm and grounds maintenance equipment is often exposed to rain, high humidity, fertilizer, pesticides and corrosive plant materials (such as grass clippings). The manufacturers of that equipment have taken steps to try to protect the equipment and reduce the potential for corrosion.

You should always lower your front loader bucket and/or rear implement when you dismount from a tractor or shut down a tractor. There are two reasons for this.

While equipment companies are doing their part to reduce corrosion of tractors and farm equipment, how well you maintain your machinery will determine its useful life. Here are some rust prevention tips.

There are three primary transmission systems used in riding mowers and the various classes of mowing tractors.